Ricoh MPC3300
Troubleshooting. Jam Codes 2
Jam Code SP | Display | Description | LCD Display |
---|---|---|---|
7504 57 | Regist Sensor | Registration sensor does not turn off. | B |
7504 59 | Fusing Exit Sensor | Fusing exit sensor does not turn off. | C |
7504 60 | Exit Sensor | Paper exit sensor does not turn off. | C |
7504 61 | Relay Exit Sensor | Tray exit sensor (bridge unit) does not turn off. |
D |
7504 62 | Relay Sensor | Relay sensor (bridge unit) does not turn off. |
D |
7504 65 | Duplex Exit Sensor | Duplex exit sensor does not turn off. | Z |
7504 66 | Duplex Entrance Sensor |
Duplex entrance sensor does not turn off. |
Z |
7504 130 | 1-Bin Exit: ON | 1-bin tray exit sensor does not turn off. | C |
7504 100 | Finisher Entrance (B408) |
Paper does not reach to the entrance sensor or stay at the entrance sensor. |
R1-R2 |
7504 101 | Finisher Shift Tray Exit (B408) |
Paper does not reach to the lower tray exit sensor or stay at the lower tray exit sensor. |
R1-R2 |
7504 102 | Finisher Staple (B408) | Paper does not reach to the staple tray entrance sensor or stay at the staple tray entrance sensor. |
R3-R5 |
7504 103 | Finisher Exit (B408) |
|
R3-R5 |
7504 104 | Finisher Drive Motor (B408) |
Exit guide plate HP sensor does not turn on or off for specified time. |
|
7504 105 | Finisher Tray Lift Motor (B408) |
|
R1-R2 |
7504 106 | Finisher Jogger Motor (B408) |
|
R3-R5 |
7504 107 | Finisher Shift Motor (B408) |
|
R1-R2 |
7504 108 | Finisher Staple Motor (B408) |
|
R3-R5 |
7504 109 | Finisher Exit Motor (B408) |
|
R3-R5 |