Ricoh MP5000
Service Program Mode. SMC Print Out Lists, Nip Band Width Adjustment
SMC Print Out Lists: SP5-990
1. Open SP mode 5-990 and select the number corresponding to the list that you wish to print.
SMC (System Parameter and Data Lists)
1 | All Data List |
2 | SP Mode Data List |
3 | UP Mode Data List |
4 | Logging Data List |
5 | Self-Diagnostics Results List |
6 | Non-Default |
7 | NIB Summary |
8 | NetFile Log |
21 | Copy UP Mode List |
22 | Scanner SP Mode List |
23 | Scanner UP Mode List |
2. Press "Execute" on the touch panel.
3. Select "Single Face" or "Both Face".
4. After printing the list, press "Close" to return to the SP mode display.
5. Press Exit twice to close the SP Mode screen and return to copy mode.
Nip Band Width Adjustment: SP1-109
When paper wrinkling or image offset occurs, the pressure from the pressure roller can be adjusted by changing the position of the pressure springs. At this time, the nip bandwidth can also be checked with SP1-109.
- Execute SP5-802 to perform a free run of about 50 sheets.
- Open SP1-109-1, press , and then press Yes to confirm the selection.
- Press Copy Window to return to the copy window.
- Place an OHP sheet (A4/8.5" x 11" LEF) on the by-pass feed tray.
- Press Start twice. The OHP sheet stops in the fusing unit for about 10 seconds, then it exits automatically.
- Check the nip bandwidth [A].
Note
- Check the nip bandwidth around the center of the OHP.
Nip band Specification: 7.0 ± 0.5 mm