Ricoh MP2001
Service Program Mode. How to Reset the PM Counter
After preventive maintenance work, reset the PM counter (SP7-804) as follows.
D160/D161/D170 Models
- Activate the SP mode
- Select SP7-804 (PM Counter Reset).
- Select SP7-804-002 (60k) or SP7-804-003 (120k).
- Press the OK key. The message "Execute" shows.
- Press the button below the message "Execute."
- The messages "Execute?" followed by "Cancel" and "Execute" show.
- To reset the PM counter, press the button below the message "Execute."
- Wait until the message "Completed" shows. 9. Quit the SP mode.
D158/D159 Models
- Activate the SP mode
- Select SP7-804 (PM Counter Reset).
- Select SP7-804-002 (60k) or SP7-804-003 (120k).
- Press the "Execute" button.
- Wait until the message "Completed" shows.
- Quit the SP mode.