Ricoh M160 SP4510SF Gim-MF1d

Follow the test pattern print procedure below to print a test pattern.

Note:
• Do not operate the machine until the test pattern has been printed. Otherwise, an SC occurs.

1. Enter the SP mode, and then select SP2-109-001.
2. Select the pattern number, and then press [OK].
3. Display the Copy function by pressing [Start] key, and then specify the scanning conditions for test pattern print.
4. Press [Start] key to print the test pattern.
5. Check the test pattern, and then go back to SP mode.

No.	Pattern
0	None
1	Vert. (1 dot)
2	Hori. (1 dot)
3	Vert. (2 dot)
4	Hori. (2 dot)
5	Grid Vert.
6	Grid Hori.
7	Grid 20mm
8	Arg. Grid
9	Arg. Grid 20mm
10	Indep. (1 dot)
11	Indep. (2 dot)
12	Indep. (4 dot)
13	Full
14	Band
15	Gray 10mm
16	Gray 20mm
17	Trim Area