Ricoh M013 SP3410DN RN-P1
Maintenance. PM Parts, Counter Reset
PM Parts
There are no PM parts in this machine.
Note:
- Other than the three Yield Parts listed below, there are essentially no PM parts required for this product.
- These three items will need to be replaced in cases where their yield is near, however, given the APV (Average Printer Volume) for this product, these "yield parts*1 " are expected to outlast the working life of the machine.
*1 "Yield Parts": Parts whose expected yield is longer than the machine lifetime when taking into consideration the machine's APV.
Description | Expected Yield | Q'ty/unit |
---|---|---|
Paper Feed Roller | 120 K prints | 1 |
Transfer Roller | 120 K prints | 1 |
Fusing Unit | 120 K prints | 1 |
Yield Counter
Yield counters for each yield part can be checked by the following methods.
Configuration Page
These yield counters are printed under the supplies Info on the "Configuration Page".
Web Image Monitor
These yield counters are displayed under the "Print Cartridge & Replaceable Parts Information" on the "Status" page as shown above.
Note:
• The machine displays "Life End Feed Roller", "Life End Transfer Roller" or "Life End Fuser Unit" when one of these counters reaches each yield.
Counter Reset
The process below shows how to reset the yield counters.
- Enter the "Printer Configuration" in SOM.
- Select "SP Mode 3" tab.
- Click "Clear Fusing Unit EM Counter", "Clear Transfer Roller EM Counter" or "Clear Paper Feed Roller EM Counter" and then click "OK".
- Exit the SOM.