Ricoh D089 MPC5501 AP-C2.5
Troubleshooting. Jam Codes 1
SP7-504 shows how many jams occurred at each location.
Jam Code SP | Display | Description | LCD Display |
---|---|---|---|
7504 3 | Tray 1: ON | Paper is not fed from tray 1. | A |
7504 4 | Tray 2: ON | Paper is not fed from tray 2. | A |
7504 5 | Tray 3: ON | Paper is not fed from tray 3 (LCT). | Y |
7504 6 | Tray 4: ON | Paper is not fed from tray 4. | Y |
7504 7 | LCT: ON | Paper is not fed from LCT. | U |
7504 8 | Bypass: ON | Paper is not fed from the by-pass tray. | A |
7504 9 | Duplex: ON | Paper is jammed at the duplex unit. | Z |
7504 10 | - | - | - |
7504 11 | Vertical Transport 1: ON | Vertical transport sensor 1 does not detect paper from tray 1. | A |
7504 12 | Vertical Transport 2: ON | Vertical transport sensor 2 does not detect paper from tray 2. | A |
7504 13 | Bank Transport 1 | Vertical transport sensor 1 or relay sensor does not detect paper from tray 3 (LCT). | Y |
7504 15 | - | - | - |
7504 16 | - | - | - |
7504 17 | Registration: ON | Registration sensor does not detect paper. | B |
7504 18 | Fusing Entrance: ON | Fusing entrance sensor does not detect paper. | B |
7504 19 | Fusing Exit: ON | Fusing exit sensor does not detect paper. | B |
7504 20 | Paper Exit: ON | Paper exit sensor does not detect paper. | C |
7504 21 | Relay Exit: ON | Tray exit sensor (bridge unit) does not detect paper. | D |
7504 22 | Relay Transport: ON | Relay sensor (bridge unit) does not detect paper. | D |
7504 23 | - | - | - |
7504 24 | Junction Gate Feed: ON | Junction gate jam sensor does not detect paper. | C |
7504 25 | Duplex Exit: ON | Duplex exit sensor does not detect paper. | Z |
7504 26 | Duplex Entrance: ON (In) | Duplex entrance sensor does not detect paper. | Z |
7504 27 | Duplex Entrance: ON (Out) | Duplex entrance sensor does not detect paper again after paper has passed this sensor. | Z |
7504 28 | - | - | - |
7504 51 | SEF Sensor 1 | Vertical transport sensor 1 does not turn off. | A |
7504 52 | SEF Sensor 2 | Vertical transport sensor 2 does not turn off. | A |
7504 53 | Bank SEF Sensor 1 | Vertical transport sensor or relay sensor 1 does not turn off. | Y |
7504 54 | Bank SEF Sensor 2 | Vertical transport sensor 2 does not turn off. | Y |
7504 55 | - | - | - |
7504 56 | - | - | - |
7504 57 | Regist Sensor | Registration sensor does not turn off. | B |
7504 58 | LCT Sensor | LCT sensor does not turn off. | U |
7504 59 | - | - | - |
7504 60 | Exit Sensor | Paper exit sensor does not turn off. | C |
7504 61 | Relay Exit Sensor | Tray exit sensor (bridge unit) does not turn off. | D |
7504 62 | Relay Sensor | Relay sensor (bridge unit) does not turn off. | D |
7504 63 | - | - | - |
7504 64 | Junction Gate Feed: OFF | Junction gate jam sensor does not turn off. | C |
7504 65 | Duplex Exit Sensor | Duplex exit sensor does not turn off. | Z |
7504 66 | Duplex Entrance: OFF (In) | Duplex entrance sensor does not turn off. | Z |
7504 67 | Duplex Entrance: OFF (Out) | Duplex entrance sensor does not turn off after paper has passed this sensor. | Z |
7504 68 | - | - | - |
7504 100 | Finisher Entrance (B408) | Paper does not reach to the entrance sensor or stay at the entrance sensor. | R1-R2 |
7504 101 | Finisher Shift Tray Exit (B408) | Paper does not reach to the lower tray exit sensor or stay at the lower tray exit sensor. | R1-R2 |
7504 102 | Finisher Staple (B408) | Paper does not reach to the staple tray entrance sensor or stay at the staple tray entrance sensor. | R3-R5 |
7504 103 | Finisher Exit (B408) | Lower tray exit sensor does not detect paper after the stack feed-out belt has fed paper. Lower tray exit sensor still detects paper after the stack feed-out belt has returned to the home position. |
R3-R5 |
7504 104 | - | - | - |