Ricoh D082 MPC7501 V-C3
Maintenance. PM Tables 2
Main Machine
TRANSFER UNITS
150K | 300K | 450K | 600K | Note | |
---|---|---|---|---|---|
ITB Unit | |||||
ITB (Image Transfer Belt) | R | ||||
ITB Unit Rollers | I | C | Wipe with dry cloth | ||
ITB Encoder Sensor | C | Wipe with damp cloth (alcohol) | |||
ID and MUSIC Sensors | C | ||||
ITB Cleaning Blade | R | These items are always replaced as a set. | |||
ITB Lubricant Bar | R | ||||
ITB Lubricant Blade | R | ||||
ITB Lubricant Brush Roller | R | ||||
PTR Unit | |||||
PTR (Paper Transfer Roller) | R | ||||
PTR Cleaning Blade | R | ||||
PTR Lubrication Bar | R | ||||
Paper Transfer Discharge Plate | R |
FUSING UNIT
150K | 300K | 450K | 600K | Note | |
---|---|---|---|---|---|
Fusing Belt | R | ||||
Hot Roller | R | ||||
Pressure Roller | R | ||||
Pressure Roller Cleaning Roller | R | ||||
Oil Supply Roller | R | ||||
Heating Roller | C | ||||
Heating Roller Shaft Bearings | C, L*1 | ||||
Hot Roller Shaft Bearings | C, L*1 | ||||
Pressure Roller Shaft Bearings | L*1 | Replace at 1200k | |||
Pressure Roller Stripper Pawls | I, C | Dry cloth | |||
Fusing Belt Stripper Plate | I, C | ||||
Thermistors | I, C | Dry cloth | |||
Upper Entrance Guide Plate | I | C | Damp cloth (alcohol) | ||
Lower Entrance Guide Plate | I | C | |||
Gears | L*1 |
*1: The lubrication points for the fusing unit are described in the "Lubrication Points" section.
PAPER FEED: COPIER
150K | 300K | 450K | 600K | Note | |
---|---|---|---|---|---|
Registration Rollers | C | Alcohol, dry cloth | |||
Paper Dust Removal Unit | C | Dry cloth | |||
Registration Sensor | C | Blower brush | |||
Vertical Transport Roller Sensors |
C | Blower brush | |||
LCT Relay Sensor | C | Blower brush | |||
Bypass Feed Sensor | C | Blower brush | |||
Bypass Paper End Sensor | C | Blower brush |
PAPER FEED: Trays
150K | 300K | 450K | 600K | Note | |
---|---|---|---|---|---|
Feed Guide Plate | C | Dry cloth | |||
Grip Rollers (Drive & Idle) | C | Alcohol, dry cloth | |||
Pick-up Rollers (Tray 1 to Tray 3) | Service Life: 1000K Replace if jams, doubleĀfeeds occur with increasing frequency. |
||||
Paper Feed Rollers (Tray 1 to Tray 3) |
|||||
Separation Rollers (Tray 1 to Tray 3) | |||||
Grip Roller (Drive Roller) | C | Dry cloth | |||
Paper Feed Sensor | C | Blower brush | |||
Vertical Feed Sensors | C | Blower brush | |||
Paper-End Sensor | C | Blower brush |