Ricoh D082 MPC7501 V-C3
Maintenance. PM Tables 1
Main Machine
OPTICS
150K | 200K | 300K | 450K | 600K | Note | |
---|---|---|---|---|---|---|
Reflector | C | Optical cloth | ||||
1st Mirror | C | Optical cloth | ||||
2nd Mirror | C | Optical cloth | ||||
3rd Mirror | C | Optical cloth | ||||
Scanner Rails | C | Alcohol then dry cloth | ||||
Exposure Glass | C | Exposure glass cleaner | ||||
Toner Shield Glass | C | Optical cloth | ||||
APS Sensor | C | Dry cloth | ||||
ADF Exposure Glass | C | Exposure glass cleaner | ||||
Dust Filters | C | Blower brush |
PCU
|
150K |
200K |
300K |
400K |
450K |
600K |
Note |
Development Unit |
L |
|
|
|
|
|
Sleeve shaft, Grease |
OPC Drums |
|
|
|
|
R |
|
KYMC:450K |
Charge Roller |
R |
|
|
|
|
|
Replace YMC together |
Cushion Wire |
|
R |
|
|
|
|
|
Cleaner Grid |
|
R |
|
|
|
|
|
Cleaner Corona |
|
R |
|
|
|
|
|
Drum Charge |
|
R |
|
|
|
|
|
Grid Drum Charge Wire*1 |
|
R |
|
|
|
|
|
Drum Cleaning |
R |
R |
|
|
|
|
YMC:150K |
Drum Lubricant |
R |
R |
|
|
|
|
YMC:150K |
Drum Lubricant Bar (x2)*2 |
R |
R |
|
|
|
|
|
Drum Lubricant Brush Roller |
R (Y,C,M) |
R (K) |
Apply G104 Yellow Toner and Zinc Stearate after replacement |
||||
PCU Joint | R | R | |||||
Drum Lubricant Brush Gear |
R | R | |||||
Idle Gear 1 | R | R | YMC: 300K K: 400K |
||||
Idle Gear 2 | R | R | |||||
Used Toner Collection Gear |
R | R | |||||
Drum Cleaning Brush Gear |
R | R | |||||
Developer K | R | ||||||
Developer Y, M, C | R | ||||||
Quenching LED | C | C | C |
*1: These items comprise the K_PCU which uses a charge corona system, and can be replaced individually. (The YMC_PCUs use a charge roller system.)
*2 The lubricant bar is the same for both K and YMC PCUs when replaced as an individual part. However, the drum lubricant bar assembly which contains the springs is not the same. The K assembly is clearly marked "K" to prevent installation of the wrong type in a PCU.