Ricoh D017 MP2550B R-C5
Service Program Mode. SP1-XXX (Feed) 2
| 1902* | AC Frequency Display |
| Displays the AC frequency for fusing temperature control. |
| 1903* | Feed Clutch Re-energize | |
| Adjusts the paper feed amount allowed by the clutch after correcting the skew at registration. When paper jams occur after restarting paper feed after registration, increase the value to help the registration roller feed the paper. | ||
| 1903 1 | By-pass Feed | [0 ~ 10 / 6 / 1 mm/step] |
| 1903 2 | Tray 1 Feed | [0 ~ 10 / 0 / 1 mm/step] |
| 1903 3 | Other Trays | |
| 1905* | Tray Paper Full Detection |
| Determines whether or not to detect if the built-in copy tray is full. [0 = No / 1 = Yes] |
| 1906* | Tray Paper Full Timer |
| Adjusts the time that the paper overflow sensor must remain on before a message appears on the LCD. The sensor may be switched on and off again if the paper is curled, giving a false tray full detection. This SP prevents this problem. [100 ~ 5000 / 500 / 10 ms/step] This SP mode is used when SP1905 is set to 1. |
| 1908* | 1st Bottom Plate Pressure Adjustment |
| 1908 1 | Normal Size |
| If a middle size threshold is not stored with SP1908-9, this SP adjusts the upper paper lift motor reverse time for paper sizes larger than the small size threshold set with SP1908-8. If a middle size threshold is stored with SP1908-9, then this SP adjusts the motor reverse time for sizes larger than the middle size. Do not input a value greater than 1200. Use this SP when a paper feed problem occurs from the 1st paper tray. See "Paper Lift Mechanism" for details on SP1908. [0 ~ 2000 / 200 / 1 ms/step] |
|
| 1908 2 | Small Size |
| Adjusts the upper paper lift motor reverse time for paper of the same size as or smaller than the small size threshold set with SP1908-8. Do not input a value greater than 1200. Use this SP when a paper feed problem occurs from the 1st paper tray. See "Paper Lift Mechanism" for details on SP1908. [0 ~ 2000 / 600 / 1 ms/step] |
|
| 1908 3 | Middle Size |
| Adjusts the upper paper lift motor reverse time for paper sizes larger than the small size threshold set with SP1908-8, up to and including the middle size threshold set with SP1908-9. If a middle size threshold is not stored with SP1908- 9, this SP is not used. Do not input a value greater than 1200. Use this SP when a paper feed problem occurs from the 1st paper tray. See "Paper Lift Mechanism" for details on SP1908. [0 ~ 2000 / 200 / 1 ms/step] |
| 1908 | 1st Bottom Plate Pressure Re-adjustment |
| 1908 4 | Small Size |
| Adjusts the upper paper lift motor forward rotation time for paper of the same size as or smaller than the small size threshold set with SP1908-8. The motor rotates forward when the remaining paper amount is lower than the value of SP1908-6. Use this SP when a paper feed problem occurs when paper in the 1st paper tray is running low. See "Paper Lift Mechanism" for details on SP1908. [0 ~ 2000 / 400 / 1 ms/step] |
|
| 1908 5 | Middle Size |
| Adjusts the upper paper lift motor forward rotation time for paper sizes larger than the small size threshold set with SP1908-8, up to and including the middle size threshold set with SP1908-9. The motor rotates forward when the amount of remaining paper is lower than the value of SP1908-7. If a middle size threshold is not stored with SP1908-9, this SP is not used. Use this SP when a paper feed problem occurs when paper in the 1st paper tray is running low. See "Paper Lift Mechanism" for details on SP1908. [0 ~ 2000 / 300 / 1 ms/step] |
|
| 1st Paper Amount | |
| 1908 6 | Small Size |
| Selects the remaining paper amount limit for use with SP1908-4. Set this SP to 2 or 3 when a paper feed problem occurs before near-end. See "Paper Lift Mechanism" for details on SP1908. [0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%] |
|
| 1908 7 | Middle Size |
| Selects the remaining paper amount limit for use with SP1908-5. Set this SP to 2 or 3 when a paper feed problem occurs before near-end. See "Paper Lift Mechanism" for details on SP1908. [0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%] |
|
| 1st Paper Size | |
| 1908 8 | 1st Small Paper Size Setting |
| Selects the small size threshold for the 1st paper tray. "0" means that this setting is not used. The size used by SP1908 is determined by paper width. See "Paper Lift Mechanism" for details on SP1908. [0 = None (Not used) / 1 = HLT/A5 / 2 = A4 / 3 = LT / 4 = DLT / 5 = A3] |
|
| 1908 9 | 1st Middle Paper Size Setting |
| Selects the middle size threshold for the upper tray. "0" means that this setting is not used. The value must be larger than the small size threshold (SP1908-8). The size used by SP1908 is determined by paper width. See "Paper Lift Mechanism" for details on SP1908. [0 = None (Not used) / 1 = HLT/A5 / 2 = A4 / 3 = LT / 4 = DLT / 5 = A3] |
| 1909* | 2nd Bottom Plate Pressure Adjustment |
| 1909 1 | Normal Size |
| If a middle size threshold is not stored with SP1909-9, this SP adjusts the upper paper lift motor reverse time for paper sizes larger than the small size threshold set with SP1909-8. If a middle size threshold is stored with SP1909-9, then this SP adjusts the motor reverse time for sizes larger than the middle size. Do not input a value greater than 1,200. Use this SP when a paper feed problem occurs from the 2nd paper tray. See "Paper Lift Mechanism" for details on SP1909. [0 ~ 2000 / 200 / 1 ms/step] |
|
| 1909 2 | Small Size |
| Adjusts the upper paper lift motor reverse time for paper of the same size as or smaller than the small size threshold set with SP1909-8. Do not input a value greater than 1,200. Use this SP when a paper feed problem occurs from the 2nd paper tray. See "Paper Lift Mechanism" for details on SP1909. [0 ~ 2000 / 600 / 1 ms/step] |
|
| 1909 3 | Middle Size |
| Adjusts the upper paper lift motor reverse time for paper sizes larger than the small size threshold set with SP1909-8, up to and including the middle size threshold set with SP1909-9. If a middle size threshold is not stored with SP1909- 9, this SP is not used. Do not input a value greater than 1200. Use this SP when a paper feed problem occurs from the 2nd paper tray. See "Paper Lift Mechanism" for details on SP1909. [0 ~ 2000 / 200 / 1 ms/step] |
|
| 2nd Bottom Plate Pressure Re-adjustment | |
| 1909 4 | Small Size |
| Adjusts the upper paper lift motor forward rotation time for paper of the same size as or smaller than the small size threshold set with SP1909-8. The motor rotates forward when the remaining paper amount is lower than the value of SP1909-6. Use this SP when a paper feed problem occurs when paper in the 2nd paper tray is running low. See "Paper Lift Mechanism" for details on SP1909. [0 ~ 2000 / 400 / 1 ms/step] |
|
| 1909 5 | Middle Size |
| Adjusts the upper paper lift motor forward rotation time for paper sizes larger than the small size threshold set with SP1909-8, up to and including the middle size threshold set with SP1909-9. The motor rotates forward when the remaining paper amount is lower than the value of SP1909-7. If a middle size threshold is not stored with SP1909-9, this SP is not used. Use this SP when a paper feed problem occurs when paper in the 2nd paper tray is running low. See "Paper Lift Mechanism" for details on SP1909. [0 ~ 2000 / 300 / 1 ms/step] |
| 2nd Paper Amount | |
| 1909 6 | Small Size |
| Selects the remaining paper amount limit for use with SP1909-4. Set this SP to 2 or 3 when a paper feed problem occurs before near-end. See "Paper Lift Mechanism" for details on SP1909. [0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%] |
|
| 1909 7 | Middle Size |
| Selects the remaining paper amount limit for use with SP1909-5. Set this SP to 2 or 3 when a paper feed problem occurs before near-end. See "Optional Paper Tray Unit - Paper Lift Mechanism" for details on SP1909. [0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%] |
|
| 2nd Paper Size | |
| 1909 8 | 2nd Small Paper Size Setting |
| Selects the small size threshold for the 2nd paper tray. "0" means that this setting is not used. The size used by SP1909 is determined by paper width. See "Paper Lift Mechanism" for details on SP1909. [0 = None (Not used) / 1 = HLT/A5 / 2 = A4 / 3 = LT / 4 = DLT / 5 = A3] |
|
| 1909 9 | 2nd Middle Paper Size Setting |
| Selects the middle size threshold for the upper tray. "0" means that this setting is not used. The value must be larger than the small size threshold (SP1909-8). The size used by SP1909 is determined by paper width. See "Paper Lift Mechanism" for details on SP1909. [0 = None (Not used) / 1 = HLT/A5 / 2 = A4 / 3 = LT / 4 = DLT / 5 = A3] |