Ricoh D017 MP2550B R-C5

Note:

• The amounts mentioned as the PM interval indicate the number of prints.
• After carrying out PM, clear the maintenance counter (SP7-804).

Symbol key: C: Clean, R: Replace, L: Lubricate, I: Inspect

	EM	120K	240K	360K	NOTE
SCANNER/LASER OPTICS
Reflector		C	C	C	Optics cloth
1st Mirror	C	C	C	C	Optics cloth
2nd Mirror	C	C	C	C	Optics cloth
3rd Mirror	C	C	C	C	Optics cloth
Scanner Guide Rails		C	C	C	Do not use alcohol.
Platen Sheet Cover	C	I	I	I	Replace the platen sheet, if necessary. Dry cloth or alcohol
Exposure Glass		C	C	C	Dry cloth or alcohol
Toner Shield Glass		C	C	C	Optics cloth
APS Sensor		C	C	C	Dry cloth or blower brush

 

	EM	120K	240K	360K	NOTE
AROUND THE DRUM
Transfer/Separation Unit		R	R	R
ID Sensor		C	C	C	Perform the ID sensor initial setting (SP2-935) after cleaning (blower brush)

 

	EM	60K	120K	180K	NOTE
PCU
Drum		R	R	R	Do SP2801. This initializes the developer and resets the TD and ID sensor outputs to their defaults. It also resets the PCU counter.
Charge Roller		R	R	R
Cleaning Roller		R	R	R
Cleaning Blade		R	R	R
Pick-off Pawls		R	R	R
Developer		R	R	R

 

	EM	120K	240K	360K	NOTE
FUSING UNIT AND PAPER EXIT
Fusing Entrance and Exit Guide Plates		C	C	C	Clean with water or alcohol.
Hot Roller		R	R	R	Clean with water or alcohol.
Pressure Roller		R	R	R
Fusing Thermistors		R	R	R
Cleaning Roller		C	C	C
Cleaning Roller Bushings		C	C	C
Hot Roller Strippers		R	R	R
Hot Roller and Pressure Roller Bushings	L	L	L	L	Grease Barrierta JFE5 5/2 (A0289300)
Paper Exit Guide Ribs		C	C	C	Clean with water or alcohol.
OTHERS
Main Motor Drive Gear	L	I	I	I	Silicone Grease G501 (see 'Main Motor Drive Gear')