Ricoh Aficio 2075
Maintenance. PM Tables. Main Machine 2
The amounts mentioned (K=1,000) as the PM interval indicate the number of prints or copies unless stated otherwise. These numbers are based on the PM counter.
Symbol key: C: Clean, R: Replace, L: Lubricate, I: Inspect, EM: Emergency Maintenance
PAPER FEED B064 Series | |||||||
---|---|---|---|---|---|---|---|
EM | 300K | 450K | 600K | 1000K | Expected K | Note | |
Feed Rollers | R | R | 450K | For the K reading, check the logging data for the paper cassette's counter. See NOTE below this table. | |||
Pick-up Rollers | R | R | 450K | ||||
Separation Rollers | R | R | 450K | ||||
By-pass Feed Rollers | R | R | 450K | See NOTE below this table. | |||
By-pass Pick-up Rollers | R | R | 450K | ||||
By-pass Separation Rollers | R | R | 450K |
PAPER FEED B140/B246 Series | |||||||
---|---|---|---|---|---|---|---|
EM | 300K | 450K | 600K | 900K | Expected K | Note | |
Feed Rollers | R | 1000K | See NOTE below this table. | ||||
Pick-up Rollers | R | 1000K | |||||
Separation Rollers | R | 1000K | |||||
By-pass Feed Rollers | R | 1000K | See NOTE below this table. | ||||
By-pass Pick-up Rollers | R | 1000K | |||||
By-pass Separation Rollers | R | 1000K |
NOTES
- Always replace pick-up, feed and separation rollers as a set.
- If the copier is a B064 Series machine, check the counter value for each paper tray station with SP7204 (Copy Counter – Paper Trays). If the value has reached 300K, replace the rollers. The quality of the paper can have an effect on the service life of the rollers. Paper with a rough surface, for example, can increase abrasion on the rollers and decrease their service life. After replacing the rollers, reset the counter with SP7816 (Copy Counter Reset).
- If the feeding from the by-pass tray causes frequent jams, and the by-pass tray is not used regularly, check the by-pass tray rollers. If pick-up, feed, and separation rollers for the by-pass tray are of lighter color than those of more frequently used trays, replace them.
TRANSFER BELT UNIT | ||||||
---|---|---|---|---|---|---|
EM | 300K | 450K | 600K | Expected K | Note | |
Transfer Belt | C | R | C | 750 | Use dry cloth to clean transfer belt. Always replace transfer belt and transfer roller cleaning blade together. Note: The expected service life of the transfer belt is 750K. However, replacement is recommended where more paper dust is present due to low quality paper. |
|
Transfer Roller Cleaning Blade | R | 750 | ||||
Transfer Entrance Guide Plate | C | C | Dry cloth | |||
Transfer Drive Roller | C | C | Dry cloth | |||
Transfer Drum Roller | C | C | Dry cloth | |||
Transfer Bias Roller | C | C | Dry cloth | |||
Transfer Exit Guide Plate | C | C | Dry cloth | |||
Discharge Plate | R | R |