OKI MPS5501b
Maintenance Mode. How to Enter
System maintenance menu (For maintenance personnel)
This menu is activated when the back ◄ and <ENTER> and <ON LINE> buttons are held down for 5 seconds while the printer is ready to print.
The menu is displayed in English irrespective of the destination of the product.
Maintenance menu display table
Item (1st Line) | Value (2nd Line | Functions |
---|---|---|
Enter Password | ****** ****** |
Enters a password to enter the system maintenance menu. The default is “000000”. From 6 to 12 digits of number or Roman character can be enter |
Save Syslog | Execute | Save network communication log(syslog) to flash rom. |
Print Syslog | Execute | Print the saved network communication log(syslog). |
Engine Diag Mode | Execute | It will be ONLINE by pressing ENTER key which issues the command from CU to PU. Check for the operation while changing the factories supplies during keeping the power ON. A new fuse will not cut and the countoperation will not be included in the old value). The check mode will finish and invalid if turing the power ON. |
Engine Diag Mode | Enters self-diagnosis mode of the engine. | |
Change Password | Displays menus to change a password. | |
New Password | ****** ****** |
Sets a new password to enter "System Maintenance" menu From 6 to 12 digits of number or Roman character can be enter. |
Verify Password | ****** ****** |
Makes User input the new password to enter "System Maintenance" menu which is set by "New Password" for confirmation. From 6 to 12 digits of number or Roman character can be enter. |