OKI MC562
Self-diagnostic mode. 1. How to Enter
Service Menu
When the equipment is in standby mode, access the password entry screen by pressing
[Setting] → [#] → [0] → [1] → [0] → [3] → [*].
The initial Password is set to "000000" (six zeros).
Entering self-diagnostic mode (level 1)
- Make sure that the LCD is in standby state (no Error window is shown) and press the [Setting] to move to the setting widow and then press the following button in the indicated sequence.
[#] → [0] → [1] → [0] → [3] → [*] - Type in the password to enter Service Maintenance Menu. It is [000000] by default. (Enter 0 six times)
- Select [Printer Maintenance] → [Engine Diag Mode] in the Service Maintenance Menu and press the [6].
Exiting self-diagnostic mode
1. When the [4] is pressed from Diag Mode (Window displaying/Factory state), the setting window will return.