OKI ES5112
Maintenance Mode. System Maintenance Menu
This menu is used for only a member of maintenance, and it is not shown to an end user.
"SYS MAINTE MENU" enters it by doing hold of a "Back" + "OK" + "Online" button by push from a Ready state simultaneously more than five seconds.
Enters a password to enter "SYS MAINTE MENU". The default password is "000000".
System Maintenance menu is displayed only in English. Show a function in the following.
Item | Value | Function / Notes |
---|---|---|
SAVE SYSLOG | EXECUTE | Save network communication log(syslog) to flash rom. |
PRINT SYSLOG | EXECUTE | Print the saved network communication log(syslog). |
CODESET | TYPE1 TYPE2 |
This menu needs to be displayed for all brands. TYPE1: does not display Russian or Greek. TYPE2: Display Russian or Greek It will be rebooted after existing from the menu. TYPE 2 is the default value for OEL/APS/OEMA brands and TYPE 1 for other brands. |
ADMIN PASSWORD RESET | EXECUTE | Reset the password (aaaaaa) of Admin Menu. When the OK switch is pressed, the following confirmation message appears. ARE YOU SURE? YES/NO When NO is selected, return to menu. When YES is selected, execute to reset. |
FUSE KEEP MODE | EXECUTE | It will be ONLINE by pressing ENTER key which issues the command from CU to PU. Check for the operation while changing the factories supplies during keeping the power ON. A new fuse will not cut and the count-operation will not be included in the old value). The check mode will finish and invalid if turing the power ON. |
ENGINE STATUS | EXECUTE | Prints engine information. |
ENGINE DIAG MODE | Enters self-diagnosis mode of the engine. | |
POWER SAVE | ENABLE DISABLE |
Sets Enable/Disable of Power Save Mode. Change the transition time to the energy saving mode by "MENUS" - "SYSTEM ADJUST" - "POW SAVE TIME"when Enable is set. |
SLEEP | ENABLE DISABLE |
Sets Enable/Disable of Sleep Mode. Change the transition time to the energy saving mode by "MENUS" - "SYSTEM ADJUST" - "SLEEP TIME"when Enable is set. |
CHANGE PASSWORD | ||
NEW PASSWORD | ************ | Sets a new password to enter "System Maintenance" menu From 6 to 12 digits of number or Roman character can be enter. |
VERIFY PASSWORD | ************ | Makes User input the new password to enter "System Maintenance" menu which is set by "New Password" for confirmation. From 6 to 12 digits of number or Roman character can be enter. |