Lexmark MC2535adwe
Service menus. Diagnostics menu. 4. Sensor tests
For non-touch-screen printer models, press [OK] to navigate through the settings.
- Enter the Diagnostics menu, and then touch Printer diagnostics & adjustments.
- From the Sensor tests section, touch Start. A list of sensor tests appears.
- Find, and then manually toggle the sensor.
Notes:
- The sensor status on the screen toggles between 1 and 0 when the sensor is properly working.
- If a sensor test fails, the test failure may not indicate a failed sensor. Further troubleshooting may be required. Check the boards and cables for possible issues.
- For the fuser exit sensor actuator, toggle it toward the rear door.
List of sensor tests
- Tray 1 pick
- Input
- Redrive/Duplex path 1
- Output bin/Narrow media
- Fuser exit
- Door interlock
- K Toner meter
- C Toner meter
- M Toner meter
- Y Toner meter
- Tray present
- TPS L and R
- Waste Toner Bottle