Lexmark 7421-436 MX912dxe
Troubleshooting. Print quality. Solid black pages check
Actions | Yes | No |
---|---|---|
Step 1 a Navigate to Settings > Allow Background Removal. Make sure that the value is set to On. b Navigate to Settings > Print Settings > Quality Menu. Decrease the toner darkness (8 is the default value). Does the problem remain? |
Go to step 2. | The problem is solved. |
Step 2 Enter the Configuration menu, and then select Print Quality Pages. Does the problem remain? |
Go to step 3. | The problem is solved. |
Step 3 a Make sure that the cartridge and photoconductor are installed. b Make sure that the cartridge and photoconductor are supported. Does the problem remain? |
Go to step 4. | The problem is solved. |
Step 4 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Printed Page Count Does the page count reach 300K or 600K? |
Go to step 5. | Go to step 6. |
Step 5 Check the following parts for damage or contamination, and replace if necessary: • Transfer roller • Transfer belt • Developer unit Does the problem remain? |
Go to step 6. | The problem is solved. |
Step 6 a Make sure that the erase LED is properly installed. b Check the LED for damage, and replace if necessary. Does the problem remain? |
Go to step 7. | The problem is solved. |
Step 7 CAUTION—SHOCK HAZARD: Do not perform this step if the printer is on. a Make sure that the following cables are properly connected: • High voltage charge cable • High voltage transfer cable • High voltage toner charge cable b Make sure that the high voltage charge and developer contacts are secure. c Check the high voltage board cables and contacts for damage, and replace if necessary. Does the problem remain? |
Go to step 8. | The problem is solved. |
Step 8 CAUTION—SHOCK HAZARD: Do not perform this step if the printer is on. a Make sure that the high voltage board cables are properly connected. b Check the high voltage board for damage, and replace if necessary. Does the problem remain? |
Go to step 9. | The problem is solved. |
Step 9 a Make sure that the printhead is properly installed. b Check the printhead for damage, and replace if necessary. Does the problem remain? |
Contact the next level of support. | The problem is solved. |