-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Kyocera TASKalfa 3011i
Troubleshooting. Mechanical problems 2
4. Multiple sheets of paper are fed.
Causes/check procedures |
Corrective measures |
Check if the paper is excessively curled. |
Change the paper. |
Paper is loaded incorrectly. |
Load the paper correctly. |
Check if the retard roller is worn. |
Replace the retard roller if it is worn |
5. Paper jams.
Causes/check procedures |
Corrective measures |
Check if the paper is excessively curled. |
Change the paper. |
Check if the contact between the upper and lower registration rollers is correct. |
Check visually and remedy if necessary. |
Check if the heat roller or press roller is extremely dirty or deformed. |
Check visually and replace the fuser unit |
6. Toner drops on the paper conveying path
Causes/check procedures |
Corrective measures |
Check if the drum unit or developer unit is extremely dirty. |
Clean the drum unit or developer unit. |
7. Abnormal noise is heard.
Causes/check procedures |
Corrective measures |
Check if the rollers, pulleys and gears operate smoothly. |
Grease the bushes and gears. |
Check if the following clutches are installed correctly.
Paper feed clutch
Registration clutch
Duplex clutch |
Check visually and remedy if necessary |