Kyocera TASKalfa 3011i
Troubleshooting. Mechanical problems 1
1. No primary paper feed.
Causes/check procedures | Corrective measures |
---|---|
Check if the surfaces of the following rollers are dirty with paper powder. Pickup roller Paper feed roller MP paper feed roller | Clean with isopropyl alcohol. |
Check if the following rollers is deformed. Pickup roller Paper feed roller MP paper feed roller |
Check visually and replace any deformed |
Defective paper feed clutch installation. | Check visually and remedy if necessary. |
2. No secondary paper feed.
Causes/check procedures | Corrective measures |
---|---|
Check if the surfaces of the following rollers are dirty with paper powder. Upper registration roller Lower registration roller |
Clean with isopropyl alcohol. |
Defective registration clutch installation | Check visually and remedy if necessary. |
3. Skewed paper feed.
Causes/check procedures | Corrective measures |
---|---|
Paper width guide in a cassette installed incorrectly. | Check the paper width guide visually and remedy or replace if necessary. |