Kyocera TASKalfa 3010i
Maintenance Mode. Modes List: U901 - U991
Section | Item | Content of maintenance item | Initial setting |
---|---|---|---|
Others | U901 | Checking copy counts by paper feed locations | 0/0/0/0/0/0 |
U903 | Checking/clearing the paper jam counts | - | |
U904 | Checking/clearing the call for service counts | - | |
U905 | Checking counts by optional devices | - | |
U906 | Resetting partial operation control | - | |
U908 | Checking the total counter value | 0 | |
U910 | Clearing the print coverage data | - | |
U911 | Checking copy counts by paper sizes | 0/0/0/0/0/0 | |
U917 | Setting backup data reading/writing | - | |
U920 | Checking the copy counts | 0/0/0/0/0/0/0/0/0/0 0/0/0/0/0 |
|
U927 | Clearing the all copy counts and machine life counts (one time only) | - | |
U928 | Checking machine life counts | 0 | |
U930 | Checking/clearing the charger roller count | - | |
U933 | Set Maintenance Mode Execute Log | - | |
U935 | Relay board maintenance | 0 | |
U942 | Setting of deflection for feeding from DP | 0/0/0 | |
U952 | Maintenance mode workflow | - | |
U964 | Checking of log | - | |
U969 | Checking of toner area code | - | |
U977 | Data capture mode | - | |
U978 | Clear Optional Function | ||
U984 | Checking the developer unit number | - | |
U985 | Displaying the developer history | - | |
U989 | HDD Scan disk | - | |
U991 | Checking the scanner operation count | 0/0/0 |