Kyocera TASKalfa 3010i
Maintenance Mode. Modes List: U250 - U415
| Section | Item No. | Content of maintenance item | Initial setting |
|---|---|---|---|
| Mode set- ting | U250 | Checking/clearing the maintenance cycle | 600000/0/300000/300000/300000/ 300000 |
| U251 | Checking/clearing the maintenance counter | 0/0/0/0/0/0 | |
| U252 | Setting the destination | Inch/Europe Metric | |
| U253 | Switching between double and single counts | Double count (A3/Ledger) | |
| U260 | Selecting the timing for copy counting | Eject | |
| U265 | Setting OEM purchaser code | - | |
| U278 | Setting the delivery date | - | |
| U285 | Setting service status page | ON | |
| U326 | Setting the black line cleaning indication | ON/8 | |
| U327 | Setting the cassette heater control | Off | |
| U332 | Setting the size conversion factor Rate Mode Level 1 Level 2 |
1.0 0 1.0 2.5 |
|
| U340 | Setting the applied mode Adj Memory Adj Max Job |
0 10 |
|
| U341 | Specific paper feed location setting for printing function | Off/Off/Off/Off | |
| U343 | Switching between duplex/simplex copy mode | Off | |
| U345 | Setting the value for maintenance due indication | 0 | |
| U346 | Selecting Sleep Mode | On | |
| Image processing | U402 | Adjusting margins of image printing | 4.0/3.0/3.0/3.9 |
| U403 | Adjusting margins for scanning an original on the contact glass | 2.0/2.0/2.0/2.0 | |
| U404 | Adjusting margins for scanning an original from the DP | 3.0/2.5/3.0/4.0 | |
| U407 | Adjusting the leading edge registration for mem- ory image printing | 0 | |
| U410 | Adjusting the halftone automatically | - | |
| U411 | Adjusting the scanner automatically | - | |
| U415 | Adjusting the print position automatically | - |