Kyocera TASKalfa 3010i
Maintenance Mode. Modes List: U000 - U053
| Section | Item No. | Content of maintenance item | Initial setting |
|---|---|---|---|
| General | U000 | Outputting an own-status report | - |
| U001 | Exiting the maintenance mode | - | |
| U002 | Setting the factory default data | - | |
| U003 | Setting the service telephone number | - | |
| U004 | Setting the machine number | - | |
| U010 | Setting the maintenance mode ID | - | |
| U018 | Check Firmware Checksum | - | |
| U019 | Displaying the firrmware version | - | |
| Initializa- tion | U021 | Memory initializing | - |
| U024 | HDD formatting | - | |
| U025 | Firmware Update(Security) | - | |
| U026 | Pulling Backup Data | - | |
| Drive, paper feed and paper conveying system | U030 | Checking the operation of the motors | - |
| U031 | Checking switches and sensors for paper convey- ing | - | |
| U032 | Checking the operation of the clutches | - | |
| U033 | Checking the operation of the solenoids | - | |
| U034 | Adjusting the print start timing LSU Out Top LSU Out Left |
41/43/ 0/0/0/0/0/0 |
|
| U035 | Setting the printing area for folio paper | 330/210 | |
| U037 | Checking the operation of the fan motors | - | |
| U051 | Adjusting the deflection in the paper | 0/0/0/0 | |
| U053 | Setting the adjustment of the motor speed Main MPT Duplex Cassette2 Feed2 Polygon Exit |