Kyocera TASKalfa 265ci
Troubleshooting. Electric problems 3
If the part causing the problem was not supplied, use the unit including the part for replacement. Troubleshooting to each failure must be in the order of the numbered symptoms.
Problem | Causes | Check procedures/corrective measures |
---|---|---|
(11) Registration clutch does not operate. |
1. Defective connector cable or poor contact in the connector. | Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Registration clutch and engine PWB (YC3) |
2. Defective clutch. | Replace the registration clutch. | |
3. Defective PWB. | Replace the engine PWB and check for correct operation | |
(12) Middle clutch does not operate. |
1. Defective connector cable or poor contact in the connector. | Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Middle clutch and engine PWB (YC3) |
2. Defective clutch. | Replace the middle clutch. | |
3. Defective PWB. | Replace the engine PWB and check for correct operation | |
(13) MP solenoid does not operate. |
1. Defective connector cable or poor contact in the connector. | Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. MP solenoid and engine PWB (YC4) |
2. Defective solenoid. | Replace the MP solenoid. | |
3. Defective PWB. | Replace the engine PWB and check for correct operation | |
(14) The message requesting paper to be loaded is shown when paper is present on the cassette. |
1. Defective connector cable or poor contact in the connector. | Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Cassette PWB (YC1) and engine PWB (YC21) |
2. Deformed actuator of the paper sensor | Check visually and replace if necessary. | |
3. Defective paper sensor. | Replace the cassette PWB. | |
4. Defective PWB. | Replace the engine PWB and check for correct operation | |
(15) The message requesting paper to be loaded is shown when paper is present on the MP tray. |
1. Defective connector cable or poor contact in the connector. | Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. MP paper sensor and engine PWB (YC16) |
2. Deformed actuator of the MP paper sensor. | Check visually and replace if necessary. | |
3. Defective MP paper sensor. | Replace the MP paper sensor. | |
4. Defective PWB. | Replace the engine PWB and check for correct operation | |
(16) The size of paper on the cassette is not displayed correctly. |
1. Defective connector cable or poor contact in the connector. | Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Cassette size switch and engine PWB (YC17) |
2. Defective cassette size switch. | Replace the cassette size switch. | |
3. Defective PWB. | Replace the engine PWB and check for correct operation |