Kyocera ECOSYS P2135dn
Service Mode. Maintenance
Counter reset for the maintenance kit
Description
The "Install MK" message means that maintenance kit should be replaced at 100,000 pages of printing. The interval counter must be manually reset using this service item.
Maintenance kit MK-172 (for 120 V specifications)
Maintenance kit MK-170 (for 230 V specifications)
Maintenance kit MK-174 (for 240 V specifications)
Maintenance kit includes the following units:
Drum unit
Developing unit
Purpose
To reset the life counter for the developing unit and drum unit included in maintenance kit.
Procedure
1. Enter the maintenance mode [>>Maintenance].
2. Press the OK key. [>>Maintenance?] will be displayed.
3. Press the OK key twice. The counter for each component is reset immediately.
Note:
Occurrences of resetting the maintenance kits are recorded on the service status page or event log in number of pages at which the maintenance kit was replaced. This may be used to determine the possibility that the counter was errorneously or unintentionally reset.