Section |
No. |
Content of maintenance item |
Outline |
FAX |
U600 |
Initialize: All Data (Message: Init All Data) |
Initialize all data and image memory. |
U601 |
Initialize: Keep Data (Message: Init Keep Data) |
Initializing the software switches of other than the machine data |
U603 |
User Data 1 (Message: User Data 1) |
Makes user settings to enable the use as a FAX |
U604 |
User Data 2 (Message: User Data 2) |
Makes user settings to enable the use as a FAX |
U605 |
Clear Data (Message: Clr Data) |
Initializing all the data regarding the FAX com- munication |
U610 |
System Setting 1 (Message: Sys- tem Setting 1) |
Setting the number of lines to ignore at 100% magnification and automatic reduction |
U611 |
System Setting 2 (Message: Sys- tem Setting 2) |
Setting the number of adjustment lines for auto- matic reduction |
U612 |
System Setting 3 (Message: Sys- tem Setting 3) |
Setting regarding the FAX communication oper- ation |
U620 |
FAX System (Message: FAX Sys- tem) |
Setting the remote change mode |
U625 |
Set Communication (Message: Set Comm) |
Set the interval of a redial and the number of times |
U630 |
Communication control proce- dures |
Setting regarding the FAX communication |
U631 |
Communication Control 2 (Mes- sage: Comm Ctrl 1) |
Setting regarding the FAX communication |
U632 |
Communication Control 3 (Mes- sage: Comm Ctrl 3) |
Setting regarding the FAX communication |
U633 |
Communication Control 4 (Mes- sage: Comm Ctrl 4) |
Setting regarding the FAX communication |
U634 |
Communication Control 5 (Mes- sage: Comm Ctrl 5) |
Set the TCF judgment standard |
U640 |
Communication Time 1 (Mes- sage: Comm Time 1) |
Setting the detection time by remote switching mode |
U641 |
Communication Time 2 (Mes- sage: Comm Time 2) |
Set the timeout time for the FAX communication |
U650 |
Modem 1 (Message: Modem 1) |
Set the G3 cable equalizer |
U651 |
Modem 2 (Message: Modem 2) |
Set the modem output level |
U660 |
Set Calls (Message: Set Calls) |
Set NCU (network control unit) |
U670 |
Output List (Message: Output List) |
Output the list of the data regarding the fax com- munication |
U695 |
Customize FAX Function (Mes- sage: Custom FAX Func) |
Set On/Off the FAX batch transmission |
U699 |
Set: Soft SW (Message: Set Soft SW) |
Set the individual software switches on the FAX PWB |
Others |
U910 |
Clear Coverage Data (Message: Clr Coverage Dat) |
Clearing the print coverage data and its period |
U917 |
Read/Write Backup HDD Data(USB) (Message: R/W Bkup Data) |
Reading/writing of backup data to USB Flash Drive |
U920 |
Set/Check Charge Count (Message: Chg Cnt) |
Display and clear the billing counts |
U927 |
Clear All Charge/Life Counter (one time only) (Message: Clr Chg/Life Cnt) |
Clear the billing counts and machine life counts |
U928 |
Check Machine Life Count (Message: Life Cnt) |
Display the machine life counts |
U930 |
Clear the main charger roller counts |
Display and set the main charger roller counts |
U977 |
Data capture mode |
Store the data sent to the MFP into a USB Flash Drive |