Kyocera ECOSYS M6530cdn
Maintenance Mode. Modes List: U201 - U520
Section | No. | Content of maintenance item | Outline |
---|---|---|---|
Opera- tion sec- tion Support equip- ment | U201 | Initialize Touch Panel (Message: Init Touch Panel) | Correction of the detection position of the touch panel |
U203 | Check DP Operation (Message: Chk DP Ope) | Checking the DP paper conveying operation on DP simple substance | |
U222 | Set IC Card Type (Message: Set IC Card Type) | Setting the IC card type | |
Mode set- ting | U250 | Change Maintenance Counter Pre-set (Message: Mnt Cnt Pre- set) | Changing the preset value |
U251 | Check/Clear Maintenance Coun- ter (Message: Clr Mnt Cnt) | Display of the maintenance counts and chang- ing/clearing | |
U252 | Set Destination (Message: Set Dest) | Setting the operation and screen of the machine according to the destination | |
U253 | Set Double/Single Count (Mes- sage: Set D/S Count) | Setting the count methods by color mode | |
U260 | Select Copy Count (Message: Set Count Mode) | Setting the count timing | |
U285 | Set Service Status Page (Mes- sage: Set Svc Sts Page) | Setting the print coverage report output | |
U332 | Adjust Coverage Size (Message: Adj Calc Rate) | Adjust Coverage Size (Message: Adj Calc Rate) | |
U345 | Set the maintenance time precau- tion display (Message: Set Mnt Time Disp) | Setting the number of sheets of a check close display till maintenance timing | |
U346 | Selecting Sleep Mode (Message: Slct Sleep Mode) | Setting the sleep mode of BAM related | |
Image process- ing | U402 | Print Margin (Message: Print Mar- gin) | Adjusting the margin of a leading edge, left edge, right edge and a trailing edge when writ- ing |
U403 | Scan Margin Tbl (Message: Scan Margin Tbl) | Adjusting the margin of the reading data by pic- ture reading of table scanning | |
U404 | Scan Margin DP (Message: Scan Margin DP) | Adjusting the margin of the reading data by pic- ture reading of table scanning | |
U407 | Adjusting the writing timing (Duplex/Reversal) | Adjusting the writing timing when duplex printing | |
U410 | Adjusting the halftone automati- cally | Acquisition of data for automatic adjustment of the halftone and the ID correction | |
U411 | Auto Adj Scn (Message: Auto Adj Scn) | Adjusting the scanner and DP automatically | |
U425 | Set Target (Message: Set Target) | Inputting the Lab value printed on an adjustment original | |
Network | U520 | Set TDRS (Message: Set TDRS) | Performing TDRS settings and information views |