Section |
No. |
Maintenance item |
Outline |
Mode Setting |
U250 |
Changing the preset maintenance counter value |
Display or set the maintenance counter preset value. |
U251 |
Clearing/checking the maintenance counter |
Display, set or clear the maintenance counter. |
U252 |
Destination |
Sets the machine operation and indication depending on the specification of the destination |
U253 |
Switching the double/single counts |
Sets the counter by color mode |
U260 |
Select Copy Count |
Setting the count-up timing |
U285 |
Set Service Status Page |
Setting the print coverage report output |
U287 |
Set Auto Reset Function |
Enable/disable the auto recovery after error |
U290 |
Setting the drive to save the HyPAS application |
Sets the drive to save the HyPAS application |
U332 |
Adjusting the black coverage coeffi- cient |
Setting the coefficient of the custom size |
Mode Setting |
U345 |
Set Service Status Page |
Setting the counter to display close to time for maintenance |
U346 |
Selecting Sleep Mode |
Setting the BAM related sleep mode |
Image process- ing |
U402 |
Adjusting the printing margins |
Adjusts the scan image margins |
U403 |
Adjusting margins for scanning an original on the contact glass |
Adjusts the margin for scanning originals |
U404 |
Adjusting margins for scanning an original from the document proces- sor |
Adjusts the margin for scanning originals |
Image process- ing |
U407 |
Adjusting the writing timing (Duplex/ Reversal) |
Adjusting the writing timing when duplex printing |
U411 |
Scanner auto adjustment |
Adjusting the scanner and DP automatically |
U425 |
Set Target |
Inputs the Lab value printed on an adjustment original |
U520 |
TDRS setting |
Checking/setting the TDRS |
FAX |
U600 |
Initialize: All Data |
Initializes all data and image memory. |
U601 |
Initialize: Keep data |
Initializing the software switches of other than the machine data |
U603 |
User data 1 |
Makes user settings to enable the use as a FAX |
U604 |
User data 2 |
Makes user settings to enable the use as a FAX |
U605 |
Data clear |
Initializing the FAX communication data |
U610 |
System 1 |
Set the number of lines to be ignored when receiving a FAX at 100% magnification and in the auto reduction mode. |
U611 |
System 2 |
Number of adjustment lines for automatic reduc- tion. |