Konica-Minolta bizhub C650
Service Mode. Function tree 4
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.
Service Mode | ||
---|---|---|
State Confirmation | Memory/HDD Adj. | Memory Check |
Compress / Decompression Check | ||
JPEG check | ||
Memory Bus Check | ||
Work Memory In/Out Check | ||
Down Version | ||
Conversion Up | ||
HDD R/W Check | ||
HDD Format | ||
Conversion Down | ||
XPS Enable Format | ||
XPS Disable Format | ||
Memory/HDD State | ||
Color Regist | ||
IU Lot No. | ||
Adjustment Data List | ||
Test Mode | Gradation Pattern | |
Halftone Pattern | ||
Lattice Pattern | ||
Solid Pattern | ||
Color Sample | ||
8 Color Solid Pattern | ||
CMM Pattern | ||
Running Mode | ||
Fax Test | ||
ADF | Original Stop Position | |
Registration Loop Adj. | ||
Auto Stop Position Adjustment | ||
Paper Passage | ||
Sensor Check | ||
Original Tray Width | ||
Read Pos Adj | ||
Feed Zoom | Orig. Feed Zoom Ad | |
Auto Adjust | ||
Scanning Light Adjustment |