Konica-Minolta bizhub C650

✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.

Service Mode
Machine	Color alignment Adjustment
	Fusing Temperature
	Fusing Transport Speed
	Org. Size Detecting Sensor Adj.
	Printer Area	Leading Edge Adjustment
		Centering
		Leading Edge Adj. (Duplex Side 2)
		Centering (Duplex 2nd Side)
		Paper Feed Direction Adj.
	Scan Area	Image Position: Leading Edge
		Image Position: Side Edge
		Cross Direction Adjustment
		Feed Direction Adjustment
	Printer Resist Loop
	Color Registration Adjustment	Cyan
		Magenta
		Yellow
	Skew adjustment	Skew adjustment
		Skew adjustment reset
	LD adjustment	LD delay adjust.
		LD lightness balance adjust.
	Manual Bypass Tray Adjustment
	Lead Edge Erase Adjustment
	Thick Paper Mode
	Split Line Prior Detection
Firmware Version