Konica-Minolta bizhub C31P
Service Mode. Function tree
| SERVICE MENU | ||
|---|---|---|
| SERIAL NUMBER | ||
| FIRMWARE VERSION |
CONTROLLER F/W | |
| ENGINE F/W | ||
| FINISHER F/W *1 | ||
| BOOT F/W | ||
| ALIGNMENT | TOP ADJUSTMENT | |
| LEFT ADJUSTMENT | ||
| LEFT ADJ DUPLEX | ||
| TRANSFER POWER | SIMPLEX PASS | |
| DUPLEX PASS | ||
| MANUAL DUPLEX | ||
| IMG ADJ THICK | ||
| IMG ADJ BLACK | ||
| IMAGE ADJ PARAM | ||
| MAXIMUM DENSITY | ||
| FUSER CONTROL | ||
| AIDC MODE | ||
| PRINT MENU | MAINTENANCE INFO | |
| EVENT LOG | ||
| CONFIGURATION PG | ||
| HALFTONE 64 | ||
| HALFTONE 128 | ||
| HALFTONE 256 | ||
| GRADATION | ||
| SUPLLIES | REPLACE | TRANS. BELT |
| TRANS. ROLLER | ||
| FUSER UNIT | ||
| RESTORE PASSWORD | ||
| BK CLEAR | ||
| QUICK SETTING *2 | UPDATE SETTING | |
| BACKUP SETTING | ||
| FIRMWARE UPDATE *2 | ||
| SOFT SWITCH 1 | ||
| SOFT SWITCH 2 | ||
| SOFT SWITCH 3 | ||
*1: It will be displayed only when the optional staple finisher is mounted.
*2: It will be displayed only when a USB memory device is mounted.