Konica-Minolta bizhub C252P

Detection Timing

Type	Description
Detection of misfeed at Tray 1 feed section	The leading edge of the paper does not block the Registration Roller Sensor (PC1) even after the lapse of a given period of time after the Tray 1 Paper Feed Clutch (CL2) has been energized.
Tray 1 Feed section Loop Registration Reversing JAM	Rise timing of load for registration is earlier than the one for making the loop at front of the Registration Roller at Tray 1 feed.

Relevant Electrical Parts

Tray 1 Paper Feed Clutch (CL2)
Registration Roller Sensor (PC1)

Mechanical Control Board (PWB-M)

Action

Step	Action
1	Initial check items
2	PC1 I/O check, Sensor check
3	CL2 operation check
4	Change PWB-M