Konica-Minolta bizhub C252P
Service Mode. Counter Reset
Functions
- To check the number of hours or times each of the different maintenance parts has been used.
- To clear the count of each counter.
Use
• When each of the maintenance parts is replaced.
Setting/ Procedure
- To clear the count of a counter, select the specific part and press the Clear key.
- If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing operation.
- It is not possible to clear the count of the counters for the Fusing Unit, Transfer Belt Unit, and IU, which are provided with a new unit detection function.
- ALL : All counters
- Transfer Roller : Number of times a sheet of paper is fed through
- Ozone Filter : Number of times a sheet of paper is fed through
- Tray 1 : Number of sheets of paper fed from Tray 1
- Tray 2 : Number of sheets of paper fed from Tray 2
- Tray 3 : Number of sheets of paper fed from Tray 3
- Tray 4 : Number of sheets of paper fed from Tray 4
- Bypass : Number of sheets of paper fed from the Bypass
- LCT : Number of sheets of paper fed from LCT
- Finisher : Number of sheets of paper fed out of the Finisher