Konica-Minolta bizhub C252P

NOTE
• Ensure appropriate security for Tech. Rep. mode function setting procedures.

Procedure

1. Make sure that the default screen (Ready to print) is being displayed, and press the
   Menu/Select key on the control panel.
2. Display the Service mode using ▲ ▼keys.
3. Press ► key to open the Password screen.
4. Enter the Password using ▲ ▼ ◄ ► and keys.
5. Press the Menu/Select key to set the Password.
   NOTE
   • When selecting “CE Authentication” under “Enhanced Security” available from Service Mode, authentication by CE (Service) password is necessary. Enter the 8 digits CE (Service) password, and press the Menu/Select key.
   (The initial setting for CE (Service) password is “92729272.”)
   • When the following setting is set to “ON”, CE (Service) password Authentication is necessary.
   [Admin. Setting] → [Security Setting] → [Enhanced Security]
   • If a wrong CE (Service) password is entered, re-enter the right password. The machine will not enter Service Mode unless the CE (Service) password is entered correctly. To return to the Basic screen, turn Main Power Switch OFF, and ON again.
   • When the following setting is set to “Mode 2”, operation will be prohibited since it indicates Authentication failure by failing to enter the correct CE (Service) Password within the specified number of times. It needs to be cancelled by turning
   Main-power OFF/ON.
   [Admin. Setting] → [Security Setting] → [Security Details] → [Prohibit Func.] → [Prohibit Setting]
   • The CE (Service) password entered is displayed as “✽.”
6. Display the Service mode item to be changed using ▲ ▼ ◄ ► and keys.
7. Press the Menu/Select key to set the item to be changed.

Exiting

• Press the “Cancel” key.

Changing the Setting Value in Service Mode Functions

1. Enter the target value using ▲ ▼ keys.
2. Press ► key to shift to the next digit.
3. Enter the target value using ▲ ▼ keys.
4. Repeat the steps 2 and 3 to enter all the necessary items.
5. Press the Menu/Select key to enter the setting.