Konica-Minolta bizhub C252
Service Mode. Function tree 3
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the Optional FAX Kit (FK-502) is mounted.
*2: It will be displayed only when the optional Fax Multi Line (ML-501) is mounted.
*3: It will be displayed only when the [Internet ISW Set] is set to “ON.”
| Service Mode | ||
|---|---|---|
| State Confirmation | Memory/HDD Adj. | Memory Check |
| Compress / Decompression Check | ||
| Memory Bus Check | ||
| Work Memory In/Out Check | ||
| HDD Version Up | ||
| HDD R/W Check | ||
| HDD Format | ||
| HDD Version Down | ||
| Memory/HDD State | ||
| Color Regist | ||
| IU Lot No. | ||
| Adjustment Data List | ||
| Test Mode | Gradation Pattern | |
| Halftone Pattern | ||
| Lattice Pattern | ||
| Solid Pattern | ||
| Color Sample | ||
| 8 Color Solid Pattern | ||
| Running Mode | ||
| Fax Test | ||
| ADF | Original Stop Position | |
| Registration Loop Adj. | ||
| Auto Stop Position Adjustment | ||
| Paper Passage | ||
| Sensor Check | ||
| Original Tray Width | ||
| Sensor Auto Adjust | ||
| FAX *1 | Line 1 *1 | Modem/ECU *1 |
| NetWork *1 | ||
| System *1 | ||
| Fax File Format *1 | ||
| Communication *1 | ||
| List Output *1 | ||
| Function Parameter *1 | ||
| Initialization *1 | ||
| Line 2 *1 | Modem/ECU *1 | |
| NetWork *1 | ||
| Communication *1 | ||
| Initialization *1 | ||
| Finisher | Center staple position (only when the FS-501/FS-603 is mounted) | |
| Fold position (only when the FS-501/FS-603 is mounted) | ||
| Fold & Staple Pos. Adjustment (bizhub C252 only) | ||
| Finisher Check (bizhub C252 only) | ||
| Punch Regist Loop Size (bizhub C252 only) | ||
| Punch Horizontal Position (bizhub C252 only) | ||
| Internet ISW | Internet ISW Set | |
| HTTP Setting *3 | ||
| FTP Setting *3 | ||
| Forwarding Access Setting *3 | ||
| Download *3 | ||