Konica-Minolta bizhub C227i
Service Mode 2. Setup Wizard
- Use of the Setup Wizard function allows those items that need to be set during the setup procedure to be extracted from the Service Mode and set.
- This enables efficient selection and setting of Service Mode functions during the setup procedure.
NOTE
▪ The specific function may be set either via the “Service Mode” or the “Setup Wizard”. The setting made last is the valid setting.
Starting procedure
- Call the initial screen of Service Mode.
- Press the following keys in this order.
Stop -> 3 - Touch the [Prev.] key or [Next] key to select the mode. e.g.
Exiting procedure
- Touch [Service]. The home Service Mode screen reappears.
- Touch [Exit].
- Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.