PrintCopy.info service

Konica-Minolta bizhub C224

Troubleshooting. Jam Code: 12-01, 12-40

Contents

JAM type Misfeed at tray 2 feed section
JAM code 12-01, 12-40
Detection timing 12-01
The leading edge of the paper does not turn ON the tray 2 vertical transport sensor (PS19) even after the lapse of a given period of time after the tray 2 starts to feed paper.
  12-40
For paper fed from the tray 2, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
  Tray 2 vertical transport sensor (PS19) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset.
  Tray 2 paper feed sensor (PS20) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. (bizhub C364/C284 only)
  In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened / closed or jam/trouble reset is done, it is regarded as paper jam at tray 2 feed section.
Misfeed processing location • Right door
• Tray 2
Relevant parts • Transport motor (M1)
• Tray 2 paper feed clutch (CL1)
• Tray 2 vertical transport clutch (CL2)
• Tray 2 vertical transport sensor (PS19)
• Tray 2 paper feed sensor (PS20)
• Printer control board (PRCB)

Procedure

Step Action Control signal Location
1 Initial check items    
2 PS19 I/O check, sensor check PRCB CN19-5 (ON) bizhub C364/C284 9-C
bizhub C224 11-C
3 PS20 I/O check, sensor check (bizhub C364/C284 only) PRCB CN19-2 (ON) bizhub C364/C2849-C
4 CL1 operation check PRCB CN19-14 (ON) bizhub C364/C284 10-C
bizhub C224 12-C
5 CL2 operation check PRCB CN19-16 (ON) bizhub C364/C284 10-C
bizhub C224 12-C
6 M1 operation check PRCB CN31-2 (REM)
PRCB CN31-5 (LOCK)
bizhub C364 21-J
bizhub C284 22-J
bizhub C224 24-J
7 PRCB ICP4 conduction check    
8 Replace PRCB    
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us