Konica-Minolta bizhub 751
Troubleshooting. Jam code list 1
| Classifica- tion | Jam code | Cause | Resulting operation | Correction | |
|---|---|---|---|---|---|
| Bypass tray | J1001 | During operation | The registration sensor (PS44) does not turn ON within a specified period of time after the loop motor (M6) turns ON. | If there is a sheet of paper being printed when a jam occurs, the main body completes the paper exit before stopping operations. | Pull out the paper from the bypass tray and remove jammed paper if any. |
| J1002 | At the start of the bypass feed, the reg- istration sensor (PS44) turns ON. | ||||
| Tray 1 | J1101 | The paper feed sensor /1 (PS1) does not turn ON within a specified period of time after the paper feed clutch /1 (CL3) turns ON. | Pull out the horizontal conveyance section and remove jammed paper if any. Pull out the tray and remove jammed paper if any. |
||
| J1102 | The horizontal conveyance sensor /Rt (PS6) does not turn ON with the paper feed sensor /1 (PS1) ON within a speci- fied period of time after the pre-registra- tion clutch /1 (CL4) turns ON. | ||||
| The horizontal conveyance sensor /Lt (PS5) or the horizontal conveyance sen- sor /Rt (PS6) does not turn ON within a specified period of time after the pre- registration clutch /1 (CL4) turns ON. | |||||
| J1103 | When idling | The horizontal conveyance sensor /Rt (PS6) turns ON while in idling. | — | Pull out the horizontal conveyance section and remove jammed paper if any. | |
| J1104 | The horizontal conveyance sensor /Lt (PS5) turns ON while in idling. | ||||
| J1105 | The paper feed sensor /1 (PS1) turns ON while in idling. | Pull out the tray and remove jammed paper if any. | |||
| Tray 2 | J1201 | During operation | The paper feed sensor /2 (PS7) does not turn ON within a specified period of time after the paper feed clutch /2 (CL5) turns ON. | If there is a sheet of paper being printed when a jam occurs, the main body completes the paper exit before stopping operations. | Pull out the tray and remove jammed paper if any. |
| J1202 | The vertical conveyance sensor /1 (PS25) does not turn ON with the paper feed sensor /2 (PS7) ON within a speci- fied period of time after the pre-registra- tion clutch /2 (CL6) turns ON. | Open the main body vertical conveyance door and remove jammed paper if any. | |||