Konica-Minolta bizhub 4700P
Service Mode. Diagnostics menu. Device Tests
Flash Test
This test verifies the condition of the flash device by writing data to it and then reading data from it.
Warning—Potential Damage: This test destroys all data on the flash device.
Note: After this test is executed, reformat the flash using the Flash Format setting in the Utilities menu.
- From the Diagnostics menu, navigate to:
Device Tests >Flash Test
Files will be lost. Go/Stop? appears. - Do one of the following:
- Press [OK] to continue.
- Press ✖ to cancel.
Note: When the test starts, it cannot be stopped or canceled. - After the test is complete, a message appears indicating a pass or fail result.
- Press ✖ to return to the Device tests menu.
- Reformat the flash device using the Flash format setting in the Utilities menu.