Konica-Minolta bizhub 4700P
Service Mode. Diagnostics menu. Output Bin Tests
Feed Tests
This test verifies that media can be fed to a specific output bin. No information is printed on the media.
To run this test:
- From the Diagnostics menu, navigate to:
Output Bin Tests >Feed Tests - Select the output bin into which you want the paper to exit. All installed output bins appear.
- Select one of the following:
- Single—Feeds a single page.
- Continuous—Continuously feeds pages until ✖ is pressed.
Sensor Test
This test verifies that the output bin sensors are working correctly.
To run this test:
- From the Diagnostics menu, navigate to:
Output Bin Tests > Sensor Test > Standard Bin
Testing... appears while the printer is verifying the state of the sensor.
The control panel displays the current state of the sensor. - Manually actuate the sensor to make it toggle between empty and full. If the sensor does not toggle, then the sensor is malfunctioning.
- Press ✖ to exit the test.