Konica-Minolta bizhub 367
Firmware 2. USB memory. Preparation
System preparation
- PC with USB ports
- USB memory
NOTE
• Possible to be non-operational products.
• USB flash memory compatible with the USB (1.1/2.0/3.0) interface
The speed is limited to USB2.0 specifications even if using a device that supports USB3.0.
• The USB memory is formatted in FAT32 format.
• No security functions such as encryption and password lock have been added (or the USB memory allows its security functions to be turned OFF).
• A USB memory that is recognized by the computer as two or more drives cannot be used.
• We recommend that you use a memory device with no more than 32 GB of capacity.
USB memory used to update firmware
- Uncompress the firmware file.
- Connect the USB to the PC, and copy the extracted data [FW0001] to the root directory of the USB memory.
NOTE
- More than one firmware data with a single model can be stored in the USB memory.
- In this case, copy the firmware data to the USB memory according to the following procedures.
1. Make the folder named "FWSelect" (case-sensitive) to the root directory of the USB memory.
2. Make a folder with any folder name (one byte alphameric characters, maximum 40 characters) under "FWSelect" folder, and store the firmware data to the folder.