Konica-Minolta bizhub 363
Service Mode. List of service mode 4
Service Mode | ||
---|---|---|
Test Mode | Gradation Pattern | |
Halftone Pattern | ||
Lattice Pattern | ||
Paper Passage Test | ||
Fax Test | ||
ADF | Original Stop Position *8 | |
Registration Loop Adj. *8 | ||
Auto Stop Position Adjustment *8 | ||
Paper Passage *8 | ||
Sensor Check *8 | ||
Original Tray Width *8 | ||
Read Pos Adj *8 | Read Pos Adj *8 | |
Auto Adjust *8 | ||
Feed Zoom *8 | Orig. Feed Zoom Ad *8 | |
Auto Adjust *8 | ||
Scanning Light Adjustment *8 | ||
Mixed Original Size adjustment *8 | ||
FD-Mag. Adj. (B) *8 | Orig. Feed Zoom Ad. *8 | |
Auto Adjust *8 | ||
FAX *1 | Line 1 *1 | Modem/NCU *1 |
NetWork *1 | ||
System *1 | ||
Fax File Format *1 | ||
Communication *1 | ||
List Output *1 | ||
Function Parameter *1 | ||
Initialization *1 | ||
Line 2 *2 | Modem/NCU *2 | |
Network *2 | ||
Communication *2 | ||
Initialization *2 | ||
Finisher *3 | FS-FN adjustment *3 | Center Staple Position *3 |
Half-Fold Position *3 | ||
Punch Edge Adj *3 | ||
Punch Regist Loop Size *3 | ||
Finisher Components Test Mode *4 | ||
Load Data *4 | ||
Alignment Plate Position *5 | ||
Paper Alignment Guides W. Adj. *3 | ||
Punch Option setting | ||
Job Separator *6 | ||
Internet ISW | Internet ISW Set | |
HTTP Setting *7 | ||
FTP Setting *7 | ||
Forwarding Access Setting *7 | ||
Download *7 |
*1: It will be displayed only when the optional fax kit (FK-508) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-508) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-527) is mounted.
*4: It will be displayed only when the optional finisher (FS-527/529) is mounted.
*5: It will be displayed only when the optional finisher (FS-529) is mounted.
*6: It will be displayed only when the optional separator (JS-505) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the reverse automatic document feeder DF-621 is mounted.