Konica-Minolta bizhub 362
Service Mode. Counter 2
6 Special Parts Counter
Functions
• To display the number of times that each PM part is used. To clear the data for any counter.
Use
- When any maintenance part is replaced.
- PC Life: Is the ratio of the PC Drum rotation compared to PC Drum Life. Clear this counter when the PC Drum Unit or developer has been replaced.
- I/C Life: Displays the number of prints according to the length of the paper.
- Developer: Number of times that the Developing Unit is replaced. Automatically counts up when the PC Life counter is cleared.
- Bypass: Number of sheets of paper fed from the Manual Feed Tray.
- Tray 1: Number of sheets of paper fed from the Tray 1.
- Tray 2: Number of sheets of paper fed from the Tray 2.
- Tray 3: Number of sheets of paper fed from the Tray 3.
- Tray 4: Number of sheets of paper fed from the Tray 4.
- LCT Parts 1: Number of sheets of paper fed from the LCT.
- Other PM Parts 1: Number of sheets of paper fed.
- Other PM Parts 2: Number of sheets of paper fed.
- Other PM Parts 3: Number of sheets of paper fed.
- ADF Take-Up: Number of document pages fed through the take-up section of the ADF.
- ADF Reverse: Number of document pages fed through the turnover unit of the ADF
- IR 1: Number of IR scans.
- IR 2: Number of IR scans.
- Toner Pages:Number of pages equivalent to the number of black dots on A4 original with B/W 5%
- Fusing Unit: Number of pages fed out.
Setting/ Procedure
Checking the counter reading
Clearing the counter reading (all and a specific one)
7 Service Call Counter
Use
• To check the number of malfunctions that have occurred for each type of malfunction. To clear the data for the counter.
Setting/ Procedure
Checking the counter reading
Clearing the counter reading (all and a specific one)
8 Application Counter
Functions
• To display or clear the readings of application counters.
Use
- Copy: Number of copies made
- Printer: Number of printed pages produced via computer
- List Print: Number of printed pages of lists
- Fax Print: Number of printed pages received as fax and mail
- Fax Transmission: Number of pages of fax transmitted
- Mail Transmission: Number of pages transmitted by fax/scanner
Setting/ Procedure
Checking the counter reading
Clearing the counter reading (all and a specific one)
9 Maintenance Counter
Functions
• To set the counter value at which maintenance should be performed for any given part.
Use
<Maintenance Counter (Set)>
- Use the Keypad to type in the maintenance counter value.
- When the reading reaches a predetermined value, appears in the sub-message display area.
<Maintenance Counter (Count)>
- Counts up when a sheet of paper is fed through the copier.
Setting/ Procedure
Checking the counter reading
Clearing the counter reading (all and a specific one)