Konica-Minolta bizhub 36
Service Mode. List of service mode
The function tree is shown to comply with the format displayed on the screen.
- *1: It will be displayed only when the optional paper feed cabinet PC-211 is mounted.
- *2: It will be displayed only when the optional finisher FS-529 is mounted.
- *3: It will be displayed only when the USB memory device is connected to the main unit.
- *4: It will be displayed only when the optional fax kit FK-509 is mounted.
- *5: It will be displayed only when the service call error is occurred.
Service Mode | ||
---|---|---|
Serial Number | ||
Firmware Version | Controller F/W | |
Engine F/W | ||
Boot F/W | ||
Panel F/W | ||
Fax F/W | ||
Scanner F/W | ||
Loadable Driver | ||
Finisher F/W *2 | ||
Printer Adjustment | Leading Edge Adjustment | Plain Paper |
Thick 1 | ||
Thick 2 | ||
Envelope | ||
Transparency | ||
Lead Edge Adj Side 2 (Dx) | Plain Paper | |
Leading Edge Adjustment Tray | Tray1 | |
Tray2 | ||
Tray3 | ||
Tray4 *1 | ||
Tray5 *1 | ||
Side Edge Adjustment | Tray1 | |
Tray2 | ||
Tray3 | ||
Tray4 *1 | ||
Tray5 *1 | ||
Left ADJ Duplex | Tray1 | |
Tray2 | ||
Tray3 | ||
Tray4 *1 | ||
Tray5 *1 | ||
Image Transfer Current | Simplex Pass | |
Manual Duplex | ||
Fuser Temp Control | Plain Paper | |
Thick1/Envelope | ||
Thick2 | ||
Transparency | ||
Printer Reg Loop Adj. | Tray1 | |
Tray2 | ||
Tray3/4/5 | ||
Duplex | ||
Manual Bypass Tray Width Adj | ||
Cooling Fan Stop Delay | ||
Fusing Productivity Choice | ||
Print Interval Extension | ||
Gradation Adjustment | Gradation Adjustment | |
MAX.Density Adjustment | ||
Max Image Density Adj | ||
TCR Level Setting | ||
TCR Sensor Adjustment | ||
Image Background Adj | ||
Feed Zoom | Plain paper | |
Thick1 | ||
Thick2 | ||
Envelope | ||
Paper Separation Adjustment | First Side | |
Second Side | ||
Paper Separation Voltage Adj | Plain Paper | |
Thick | ||
Envelope | ||
Transparency | ||
Replenish Toner | ||
Scanner Adjustment | FB Leading Edge | |
FB Side Edge | ||
ADF(F) Leading Edge | ||
ADF(F) Side Edge | ||
ADF(B) Leading Edge | ||
ADF(B) Side Edge | ||
FB CD Multiplier | ||
FB FD Multiplier | ||
ADF(F) CD Multiplier | ||
ADF(F) FD Multiplier | ||
ADF(B) CD Multiplier | ||
ADF(B) FD Multiplier | ||
Tilt(F) | ||
Tilt(B) | ||
Print Menu | Mgmt. List | |
Event Log | ||
Adjust Information | ||
Element Page | ||
Black 64 | ||
Black 128 | ||
Black 256 | ||
Gradation | ||
Scanner Adjustment | ||
Scan Event Log | ||
Lattice Pattern | ||
Communication Log Print | ||
Supplies | Life Counter Clear | Drum Unit (K) |
Transfer Roller Unit | ||
Fusing Unit | ||
Developing Unit (K) | ||
Developer Replace Count | ||
Developer(K) | ||
Ozone Filter | ||
Paper Dust Remover | ||
Feed Roller (Bypass) | ||
Feed Roller (Tray2) | ||
Feed Roller (Tray3) | ||
Feed Roller (Tray4) *1 | ||
Feed Roller (Tray5) *1 | ||
Finisher Counter *2 | ||
Firmware Update *3 | ||
CS Remote Care | ||
Clear Admin Password | ||
CE Password | ||
Soft Switch | ||
Engine DipSW | ||
Function | Comp. Check | |
Sensor Check | ||
Scanner Sensor Check | ||
Finisher Check | ||
Enable Warning | Toner Low | |
Toner Change | ||
Loadable Driver Information | ||
System Settings | Installation Date | |
Sleep ON/OFF Choice Setting | ||
Foolscap Size Setting | ||
Machine State LED Setting | ||
Auto Drum Dry | ||
Fluorescent Flicker Control | ||
Marketing area | ||
Service Fax Settings *4 | ||
Trouble Reset *5 | ||
Life Stop Setting |