Konica-Minolta bizhub 3301P

Flash Test

This test verifies the condition of the flash device by writing data to it and then reading data from it.

Warning—Potential Damage: This test deletes all data on the flash device.

1. From the Diagnostics menu, navigate to:
   DEVICE TESTS >Flash Test
2. Files will be lost. Go/Stop? appears.
3. Do any of the following:
   - Press [OK] to continue.
   - Press [e] to cancel.
4. When the test starts, Flash Test Testing… appears. The test cannot be stopped or canceled after it has begun.
5. After the test is complete, a message appears indicating a pass or fail result.
6. Press [e] to return to the Device tests menu.
7. Reformat the flash device using the Flash format setting in the Utilities menu.