Konica-Minolta bizhub 250
Service Mode. Settings in the Counter 1
1 Checking the counter reading
- Call the Tech. Rep. Mode to the screen.
- Touch the [Counter].
- Touch [Check] and the specific counter key whose reading is to be checked.
2 Clearing readings of all counters at once
- Call the Tech. Rep. Mode to the screen.
- Touch the [Counter].
- Touch the [Counter Reset].
- Touch the counter keys to be cleared and then touch [OK].
3 Clearing the reading of a specific counter
- Call the Tech. Rep. Mode to the screen.
- Touch the [Counter].
- Touch the specific counter key to be cleared and press the Clear key. If the reading of a wrong counter key has been cleared, press the Interrupt key to undo the clearing operation.
4 Paper
Functions
• To display the number of sheets used for each paper size and each paper type. To clear the data for any counter.
Setting/ Procedure
Checking the counter reading .
Clearing the counter reading (all and a specific one)
5 Jam Counter
Functions
• To display the number and frequency of misfeeds. To clear the data for any counter.
Setting/ Procedure
Checking the counter reading .
Clearing the counter reading (all and a specific one)