HP LaserJet M72625 MFP
Firmware upgrades
Perform a firmware upgrade
The firmware bundle is a .bdl file. This file requires an interactive upgrade method. The traditional FTP, LPR or Port 9100 methods of upgrading are not available. Use the following method to upgrade the firmware for this product through the HP Embedded Web Server.
NOTE:
The product should be at the Ready state.
The firmware update might take 10 minutes or longer based on the input/output (I/O) transfer rates and the time it takes for the product to reinitialize.
- Open an Internet browser window.
- Enter the product IP address in the URL line.
- Sign in using the admin user name and password: admin/admin.
NOTE: The admin password is set the first time the printer initializes. - Select the Maintenance tab.
- Click Upgrade Wizard.
- Click Browse and browse to the location where the firmware upgrade file was downloaded to, and then select the firmware file—the file has an .hd file extension. Click the Next button to verify the firmware file. Click the Next button to perform the upgrade.
NOTE: Do not close the browser window OR interrupt communication until the HP Embedded Web Server (EWS) displays the confirmation page. - After the product reinitializes, return to the Maintenance tab to verify the updated firmware version or print a configuration page and verify that the latest firmware version has been installed.