Epson WorkForce WF600
Troubleshooting. Check point for Fatal error 2
Occurrence timing CR position
• Power on
• Anywhere
Detailed phenomenon | Defective unit/part name | Check point | Remedy |
---|---|---|---|
When turning on the power, the Carriage Unit collides to the Change Lever located to the front side of the printer. | PF Motor | 1. Check if the PF Motor Connector Cable is connected to CN10 on the Main Board. | 1. Connect the PF Motor Connector Cable to CN10 on the Main Board. |
2. Check if the PF Motor Connector Cable is not damaged. | 2. Replace the PF Motor with a new one. | ||
3. Check if the PF Motor operates. | 3. Replace the PF Motor with a new one. | ||
ASF Unit | 1. Check if the Compression Spring 2.36 does not come off in the Change Lever. | 1. Replace the ASF Unit with a new one. | |
The Carriage Unit collides with the Upper Paper Guide Unit when power is turned on. | Upper Paper Guide Unit | 1. Check if the Paper Guide Upper Unit is correctly assembled. | 1. Reassemble the Upper Paper Guide Unit to the Main Frame correctly. |