Epson Stylus BX600FW
Troubleshooting. Check point for Fatal error 3
Occurrence timing CR position
• Power on
• Anywhere
Detailed phenomenon | Defective unit/part name | Check point | Remedy |
---|---|---|---|
When turning on the power, the Carriage Unit collides to the right side of the Main Frame. | CR Scale | 1. Check if the CR Scale does not come off or it properly passes through the slit of the CR Encoder Board. | 1. Reassemble the CR Scale correctly. * If the problem is not solved, replace the Main Board with a new one. |
2. Check if the CR Scale is not damaged or contaminated. | 2. Replace the CR Scale with a new one or clean it completely. | ||
CR Encoder Board | 1. Check if the Encoder FFC is connected to the CR Encoder Board. | 1. Connect the Encoder FFC to the CR Encoder Board. | |
2. Check if the Encoder FFC is not damaged. | 2. Replace the Encoder FFC with a new one. | ||
3. Check if the CR Encoder Board is not damaged. | 3. Replace the CR Encoder Board with a new one. |