Epson SC-B6080
Troubleshooting. Ink End Error
Ink End Error (“Refill Ink Tank.”) occurs even sufficient ink remains in the ink tank (Remaining ink level is 70 mm or more from the bottom of the Ink Tank).
Cause
Foreign material came in from the spout of the ink tank, and it caused filter clogging inside the ink tank and blocked ink flow, then Ink End Error occurred.
Remedy
Replace the ink tank with a new one. Discard the old tank and the ink inside the tank.
Cause
Installation of the ink tank is not appropriate, so ILS cannot be detected correctly.
Remedy
Check the detection condition of ILS from Sensor Check in the Serviceman Mode.
OFF: ILS is detected.
ON: ILS is not detected correctly.
If ON is displayed, re-install the corresponding ink tank.