Epson ME Office 650FN
Troubleshooting. Check point for Fatal error according 3
Detailed phenomenon
When turning on the power, the Carriage Unit collides to the Change Lever located to the front side of the printer.
Occurrence timing, CR position
• Power on
• Anywhere
Defective unit/part name | Check point | Remedy |
---|---|---|
PF Motor | 1.Check if the PF Motor Connector Cable is connected to CN7 on the Main Board. | 1.Connect the PF Motor Connector Cable to CN7 on the Main Board. |
2.Check if the PF Motor Connector Cable is not damaged. | 2.Replace the PF Motor with a new one. | |
3.Check if the PF Motor operates. | 3.Replace the PF Motor with a new one. | |
ASF Unit | 1.Check if the Compression Spring 2.36 does not come off in the Change Lever. | 1.Replace the ASF Unit with a new one. |
Detailed phenomenon
The Carriage Unit collides with the Upper Paper Guide Unit when power is turned on.
Occurrence timing, CR position
• Power on
• Anywhere
Defective unit/part name | Check point | Remedy |
---|---|---|
Upper Paper Guide Unit | 1.Check if the Paper Guide Upper Unit is correctly assembled. | 1.Reassemble the Upper Paper Guide Unit to the Main Frame correctly. |