Canon imageRUNNER Advance 400
Troubleshooting. Jam Code. Staple Finisher-R1
Staple Finisher-R1
<ACC ID | Jam Code | Type | Sensor ID | Sensor Name |
---|---|---|---|---|
02 | 1001 | DELAY | S1 | Inlet Sensor |
02 | 1004 | DELAY | S2 | Delivery Sensor |
02 | 1104 | STNRY | S2 | Delivery Sensor |
02 | 1F01 | TIMING | S1 | Inlet Sensor |
02 | 1500 | STP | S11/S12 | Stapler HP Sensor, Stapler Edging Sensor |
02 | 1401 | DOOR OP | SW1/S1 | Front Door Switch, Inlet Sensor |
02 | 1404 | DOOR OP | SW1/S2 | Front Door Switch, Delivery Sensor |
02 | 1301 | POWER ON | S1 | Inlet Sensor |
02 | 1304 | POWER ON | S2 | Delivery Sensor |
02 | 2F77 | ERROR *1 | - | - |
02 | 2F30 | ERROR *1 | - | - |
02 | 2F37 | ERROR *1 | - | - |
02 | 2F83 | ERROR *1 | - | - |
02 | 2F75 | ERROR *1 | - | - |
02 | 2F40 | ERROR *1 | - | - |
02 | 2F31 | ERROR *1 | - | - |
*1: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If the same jam is detected regardless of the operation above, the error code is displayed.